Category: Termite Inspection

termite inspection

The procedure of termite inspection should follow the Australian Standards regarding termite inspections. You may ask any of the highly experienced termite inspectors in the region. According to them, even when they are doing a general pest control treatment for their clients, termites are pretty much always a relevant point brought into the conversation.

A lot of homeowners have complaints against the last termite inspection performed on their property. They think it was not an extensive inspection. And the reason they believe it wasn’t comprehensive because the termite inspector didn’t go into the roof void. Well, that is a valid complaint since, in most cases, it’s wrong.

In a termite inspection procedure, the technician in charge should always go into the roof void. This should be done to check for termite activity or damage. But the point here to note is that there are some limitations in this method.

Let us check out what a proper termite inspection should involve, the tools used to aid in the inspection process, and more. This will surely help you learn what to look out for when you get yours done next time.

What Need to Be Inspected

There are certain factors in a termite inspection. And you, as a customer, must have some understanding of what this process should entail ensuring you are getting what you pay for.

Most inspections start on the outside of the property. That means having a detailed look at the fences, gardens, old tree stumps, etc., is very important. The list includes anything that may be favourable to a termite attack. By the way, the termite barriers play a crucial role in preventing termite attacks.

The other aspects to check are any other buildings such as sheds, outhouses, garages within the property boundary, and 50 meters of the property.

Once the exterior inspection is done, the inside assessment should begin. This process should involve inspecting every accessible room, all skirting boards, window, and door frames.

Areas including roof voids and sub-floors should also have to be inspected. This is where maybe not all inspectors are generous and careful enough. If an inspector avoids checking these areas because that place is full of bugs, cramped and hot, and not the right place to be, that cannot be an excuse not to inspect.

An inspector must write in their report regarding why they can’t gain access to the roof void or the subfloor. There is a standard stated in the Australian standards 4349.3for reasonable access.

Termite Inspection Tools

There are various types of tools that an inspector can use during a termite inspection process. But basically, only two are required. These two tools include a moisture meter and a sounding stick. These are a requirement in the Australian standard 4349.3.

Another popular tools are a thermal imaging camera that some experts think gives a better overall inspection. This tool is more of a sounding device, though these are completely optional.

But do you know what the primary tool regarding a termite inspection is? It is the technician. After all, they need to understand various types of termites common in Australia and their nesting, feeding, and breeding habits.